Bluetooth Readers
The Remsdaq Bluetooth Reader is a reader for use with mobile phone credentials and EntroWatch access control software.
- Features & Benefits
- Specifications
- Documents
- Contactless RFID & Bluetooth
- Access control with a smartphone
- Multi-technology
- Vandal resistant
- Multiple identification modes
- End-to-End security
- Scalable
- Frequency: 13.56 MHz + Bluetooth® (Low Energy)
- Standards: ISO14443 types A & B, ISO18092 / Certifications: CE, FCC, IC & UL
- Chip: STid Mobile ID® (Bluetooth® and NFC HCE virtual cards), Orange Pack ID + MIFARE Ultralight® & Ultralight® C, MIFARE® Classic & Classic EV1, MIFARE Plus® (S/X) & Plus® EV1, DESFire® 256, EV1, EV2 & EV3, NFC HCE, SMART MX, CPS3, PicoPass® (CSN only), iCLASS™ cards (CSN only)*, French Ministry cards (“Carte AGENT”, CIMS, STITCH)
- Functions: CSN read-only, secure (file, sector) and secure protocol (Secure Plus) / Secure read-write
- Interfaces: TTL Clock&Data (ISO2) or Wiegand output (encrypted option – S31) / RS485 output (encrypted option – S33) with secure SSCP® v1 and v2 communication protocols, OSDP™ v1 (plain communication) and v2 (SCP secure communication) – Compatible with EasySecure interface (encrypted communication)
- Reading Distances: 0 – 8 cm / 0 – 3.15’’ with RFID / 0 – 20 m / 0 – 66 ft with Bluetooth®
- Power Supply: 7 – 28 VDC / 150 mA/12 VDC max
- Material: ABS-PC-UL-V0 (black) / ASA-PC-UL-V0 UV (white)
- Colour: black or white – Other possibilities for cover customization
- Dimensions (h x w x d): 106,64 x 80 x 25,70 mm / 4.17’’ x 3.14’’ x 0.98’’
- Operating Temperatures: – 30°C to + 70°C / – 22°F to + 158°F
- Storage Temperature: -40°F to +85°F / -40° F to +185°F
- Protection: reinforced vandal proof structure IK10 / Accelerometer-based tamper detection system
- Resistance: IP65 Level excluding connector – Weather-resistant with waterproof electronics (certification CEI NF EN 61086) / Humidity: 0 – 95%
The Remsdaq Bluetooth Reader is an access control reader that can be used to read smart card credentials on an Android or IOS smartphone. The reader can be configured to work in one of the following modes:
- Card: place a mobile phone in front of the Bluetooth reader
- Handsfree: simply walk past the Bluetooth reader to gain access or exit from a controlled door
- Remote: with the App open on your smartphone use the built-in remote-control feature to gain access through controlled doors and gates
- Slide: place your hand in front of the Bluetooth reader to signal your presence with your smartphone in your pocket
- Tap Tap: open an access controlled door by tapping your smartphone twice
The Bluetooth reader is compatible with EntroWatch software to provide a scalable access control system from 2-doors up to 800 and is suitable for a wide range of buildings.
The smart card mobile phone app is free (download from an App Store).
Please contact us for further information.
