Face Recognition Terminals

  • Face Recognition Camera Terminals

The Remsdaq Face Recognition & Temperature Monitoring Camera is a facial recognition and temperature detection solution using artificial intelligence for biometric Access Control and Health Management.

  • Temperature detection to within 0.3°C
  • Temperature Measurement Distances 0.5-1.3m, 0.75m optimum
  • Facial recognition with up to 30,000 data base records
  • Mask wearing detection
  • 2 MP Ai HD Camera
  • 1.2mm thick tempered glass
  • 7 HD Screen
  • Wiegand Interface for use with access control systems
  • Operate as a standalone screening camera terminal
  • Turnstile and fast lane mount options
  • Main Processor: MX3520
  • Operating System: embedded LINUX
  • RAM: DDR3 512MB
  • ROM: EMMC 8GB
  • Dimensions: 7inch IPS HD LCD screen
  • Resolution: 736*1280
  • Camera Type: 2MP night vision living detection camera
  • Sensor: 1/5inch GC2145
  • Resolution: NIR 800*600 15fps
  • Lens: 2.4mm
  • Camera Lens: 2.4mm
  • Sensor: 1/2.8inch SONY Starvis Back illuminated CMOS sensor IMX307
  • Resolution: Color 1920*1080 30fps
  • Lens: 4.5mm
  • Network Protocol: IPv4. TCP/lP.HTTP
  • Security Mode: authorized username and password
  • Event Linkage: voice broadcast. Abnormal event upload to the platform
  • System Upgrade: support remote upgrade
  • Interface Network: RJ45 10M/100M Network Adaptation
  • Alarm Output 1 Channel: relay output (NC or NO)
  • RS232 Interface: support
  • RS485 Interface: support
  • Audio Support
  • Reset Key Support
  • Housing: aerospace aluminium metal body and bracket, plastic screen, IP66
  • Operating Temperature: -20 to 60°C
  • Working  Humidity: 10% -90% non-condensing
  • Storage Temperature: -40 to 70°C
  • Storage Humidity: 5 to 95% non-condensing
  • Power Supply: 12Vdc
  • Power Dissipation: (maximum) 12W
  • Dimensions: 219Wx111Hx21.5Dmm
  • Bracket Size: cp25x189mm
  • Installation Method: desktop or floor or wall

The Remsdaq Face Recognition & Temperature Monitoring Camera is a facial recognition and temperature detection solution using artificial intelligence for biometric Access Control and Health Management.  The camera terminal can accurately screen for body temperatures to within +/- 0.3°C. If the measured temperature is higher than a pre-set value, the device issues a local audible alarm and can report the event to a mobile phone and/or its computer-based monitoring software. The camera terminals monitor forehead temperatures within a 36-42°C range within 0.5 to 1.3m with an optimal measurement distance of 0.75m. When used for facial recognition and contactless door entry, the credential check time of the camera face to the stored database is within 1.5 to 2 seconds. The terminals can also be set to test for mask wearing.

The face camera terminals provide an easy way to screen entry points to a building or area within. The camera terminals also provide contactless door unlocking when used with an access control system using a Wiegand Interface – including the Entro access control series. The camera terminals can be placed at a building entrance or any other door leading to a workspace that must be made safe for users. Typical applications including the screening of people entering offices, factories, care homes, surgeries, hospitals, schools, restaurants and retail outlets.

The camera terminals can also be set-up as a stand-alone screening solution.

Camera Terminal Options

  • Floor, turnstile and fast lane mounts

Please contact us for further information.

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close