Callistonxl RTU
- Features & Benefits
- Specifications
- Documents
- Smart Distribution Network Automation Schemes
- Main Board I/O 16 DI, 8 DO (standard) plus 4 DC A/I (option)
- Mix and match I/O expansion slots
- 2 Ethernet, 2 serial ports
- IEC 61850 compliant (option)
- IEC 61131 logic (option)
- Multi-protocol support
- Integrated GPS receiver (option)
- Comprehensive diagnostic and configuration tools
General
- Extensive distribution automation applications
- Standalone or networked architecture
- DNP3, IEC870-5-101, 103 and 104 protocol support
- SOE processing to 1ms accuracy
- IEC 61850 (option)
- IEC 61131 PILoT progammable logic (option)
- View embedded web server
- CaSE PC based configuration tool
- GSM, 3G/4G and Packet Switched Radio Support
- Co-operative Peer-to-Peer capabilities
Base IO
- 16 optically isolated digital inputs
- 8 digital outputs configured as either 4 trip/close pairs or direct operate
- LEDs for local status indications
- Dummy circuit breaker via bi-colour LED indications
- 4 DC analogue inputs unipolar or bi-polar 0 to +/- 10V or 0 to +/- 20mA (option)
Integral Communication Ports
- 2 Ethernet ports 10/100Base-T(X)
- 2 serial ports (1xRS232 and 1xRS485)
- 1 USB 2.0 port
Memory
- Flash 256 MB, DDR2 SDRAM 128 MB and Micro SD Flash slot
Expansion
- Two expansions slots each with:
- 16 optically isolated digital inputs
- 8 digital outputs configured as either 4 trip/close pairs or direct operate
- 4 DC analogue inputs unipolar or bi-polar 0 to +/- 10V or 0 to +/- 20mA (option)
Dimensions
- 300mm x 212mm x 35mm (118.5mm with expansion module)
Callistonxl is part of the Callistonx range and is a compact solution for small point count SCADA and automation project.
Typical Applications
The Callistonxl is a cost-effective solution for small point count SCADA applications including:
- Substation and Distribution Automation
- Remote Terminal Unit
- Pole Top
- Programmable Logic Controller (PLC)
- Data Logger
- Communications Gateway
